Flash Stock Firmware 10F LG G6 H870 KDZ Method Using LGUP & Uppercut Terbaru 2019

Flash Stock Firmware 10F LG G6 H870 KDZ Method Using LGUP & Uppercut.

Flash Stock ROM 10F LG G6 H870. The following manual will explain a way to solve boot loop or bricked trouble on Android LG G6. Or you may additionally use this manual to improve to the contemporary Android version. This is 10F stock firmware, which 10f is the second official LG Android 7.0 Nougat replace for open UE devices. To flash the 10f inventory firmware, we want the LGUP and Uppercut.

We recognize that LGUP device is a brand new flashing tool to flash kdz/tot/bin stock ROM layout into the LG smartphone tool. LGUP paintings only on Windows Operating System. But, not all LG devices are supported through LGUP flash device. Therefore, we need Uppercut. The Uppercut allows LGUP to instantly work with a ton of various LG smartphone models. So you do now not need to be stressed to discover particular version documents.

To flash a stock ROM LG G6 the usage of LGUP tool, honestly set up LGUP tool. Then double-click the uppercut.exe and LGUP will open and come across your device robotically. For greater detail facts you can visit the discussion board-xda-developer here

So, what do we need to flash stock ROM 10f to LG G6? The following are the necessities.

Requirement.

1. A pc with Windows OS primarily based.
2. LG's Windows USB drivers. Here
3. LGUP device Here
4. Download Uppercut from Here
5. Download Stock ROM 10f for LG G6.

• H87010f_00_OPEN_EU_OP_0417.kdz 

Instruction How to flash LG G6.

1. Make positive all required documents above are correctly downloaded in your laptop. Then, do the subsequent step.

• Install LG USB Driver
• Install the state-of-the-art LG UP software
• Extract or Unzip Uppercut.zip

Then, double-click on the uppercut.exe earlier than running LGUP. Uppercut.exe calls for LGUP 1.14 (not 1.11) installed at the pc.

uppercut LGUP

Now, positioned your LG G6 Smartphone into download mode, you may manually do it by using ;//goo.gl/Y5SGeF

• Turn Off your LG G6 Smartphone tool.
• Then press and maintain Volume UP button whilst connecting your LG G6 Smartphone to the pc the usage of the USB cable.

Then run LGUP tool.wait a second till LGUP discover and recognize your LG telephone. This will installation a vital USB Drivers on your device.now, your LGUP ought to show up for your pc screen.

Flash LG G6 H870 the use of LGUP

From LG UP screen above, visit process tab and pick Upgrade. Then click on on BIN record beneath file kind.

Flash LG G6 H870 the usage of LGUP

Then click the button on the right side of bin file shown within the photo below.

Flash LG G6 H870 the usage of LGUP

This movement will browse your kdz/tot record you just down load.once your kdz/tot file already in the LGUP software, now click on Start.

Flash LG G6 H870 the usage of LGUP

Now, LGUP will start the flashing method, this is indicated at the progress bar.

Flash LG G6 H870 the usage of LGUP

Just wait till the step on development bar indicates 100% entire. Once it completed LG G6 will automatically rebootNow, you can unplug your LG G6 device from the pc.