Guide Install Android Oreo on Huawei Honor 9 Smartphone.
Android Oreo Huawei Honor 9. By default, Huawei Honor 9 Smartphone comes with Android 7.0 (Nougat). And now, we strive to install Android Oreo in this device. This trick comes from the XDA discussion board proudly supplied by way of XDA member, OldDroid. You have to examine carefully this text, in order to get the great end result on your improve. And you want to recognise, all the dangers that occur after installing Android Oreo on Huawei Honor 9 are your very own responsibility.
Make sure device is Huawei Honor 9 to comply with this manual, right here are some specifications approximately Honor 9. This device is launched on 2017, July. Comes with 5.15 inches LTPS IPS LCD capacitive touchscreen, 16M colorings. Powered by means of Octa-middle (4x2.4 GHz Cortex-A73 & 4x1.8 GHz Cortex-A53) CPU, HiSilicon Kirin 960 Chipset, and Mali-G71 MP8 GPU.
Now, simply comply with this grade by grade manual.
Prerequisite.
- At least 8 GB MicroSD card.
- D0wnload the C432 firmware and extract it from Here.
- Once it successfully downloaded, you must extract to the foundation of your MicroSD.
- Other documents wished for this process are available at this Here.
- Make certain ADB installed on your computer. If now not, you could see this guide.
Instruction manual.
First Part.
- Put the Firmware on MicroSD card.
- Then, if your tool run Android Nougat you need to flash TWRP through Fastboot. See this manual on how to flash TWRP recuperation Huawei Honor 9.
- twrp-3.1.1-nougat-stf.img
- Press and hold shift + right click, and click on open command activate here.
- You can perform this assignment where the ADB folder is positioned.
dd if=/external_sd/STF_RECOVERY_NoCheck.img of=/dev/block/bootdevice/via-name/recovery_a
dd if=/external_sd/STF_RECOVERY_NoCheck.img of=/dev/block/bootdevice/through-call/recovery2_aecho --update_package=/sdcard/replace.zip > /cache/recuperation/commandecho --update_package=/sdcard/update_data_full_public.zip >> /cache/recuperation/commandecho --update_package=/sdcard/update_full_STF-L09_hw_normal.zip >> /cache/restoration/commandThen reboot your Honor 9 via shell ADB, type the following command to do it.At this step, the set up must begin, and then boot your Huawei Honor 9 into Android Oreo. But this step isn't always executed but.
- reboot recovery
Second Part.
- Now your Huawei Honor 9 is administered on Android Oreo.
- In this component, you may see that boot animation is missing, and few different matters do not paintings well.
- Then, you must set up TWRP for Android OREO on your Huawei Honor 9 using this command. See this manual how to flash TWRP recuperation Huawei Honor 9.
This TWRP record also to be had at prerequisite no. 4 above.then, Boot your Huawei Honor 9 into TWRP and flash the supplied SuperSU zipYou can use root browser - unfastened or root explorer - paid or any root browser to open it.go to /cust/hw rename "normal" folder to "eu" (without the costs)Then go to /version/special_cust/STF-L09/hw rename "normal" folder to "eu" (without the rates)Now, reboot your Huawei Honor 9.
- fastboot flash recovery_ramdisk twrp-3.1.1-oreo-stf.img
Third Part.
- Actually, this component is not wanted, but it is recommended.
- First factor you need to take action at the third part is flash stock ramdisk to ramdisk partition the use of fastboot, kind the following command at the fastboot;
Then, flash stock recuperation ramdisk the usage of fastboot, for that you need to type this command.
- fastboot flash ramdisk RAMDISK.img
RAMDISK.img and RECOVERY_RAMDISK.img document also available at prerequisite no. 4 above.then, boot your Huawei Honor 9 into recovery. How to do it?Once your Huawei Honor 9 enter restoration mode. Now, you need to perform a factory reset.reboot your cellphone, then setup your tool.
- fastboot flash recovery_ramdisk RECOVERY_RAMDISK.img
0 comments:
Post a Comment