Guide How to Unlock Bootloader at the ZTE Axon 7 Mini with Tuliptool.
Unlock Bootloader on the ZTE Axon 7 Mini. The following guide will display you how to Unlock Bootloader on the ZTE Axon 7 Mini. Generally, the human beings liberate their phone bootloader to make a root or flashing any custom ROM for his or her telephone. So, if you need this records to liberate the bootloader in your ZTE Axon 7 Mini, you could try and use it. Before this manual starts, I might say special way to rombdeta as an XDA member for supplying the OEM programmer binary.
By unlocking the bootloader your ZTE Zxon 7 Mini, your device gets the following capabilities;
- Install a custom boot photo
- Unlock your bootloader
- Lock your bootloader
- Install a custom healing
- Check the reputation of your bootloader.
To release the bootloader we need a special device, this device is tuliptool. This device isn't always an reliable ZTE liberate tool. Please be cautious in the use of this tool, It can render your ZTE Axon 7 Mini device completely unusable. Your manufacturing unit assurance will likely be void. You ought to take delivery of all duty for the consequences when the usage of this tuliptool device.
This your ZTE Axon 7 Mini specifications. This tool released on 2016, May. Comes with 5.5 inches AMOLED capacitive touchscreen, 16M colorations. Runs on Android 6.0.1 (Marshmallow), upgradable to 7.1.1 (Nougat). Powered by using Qualcomm MSM8996 Snapdragon 820 chipset, and Quad-middle (2x2.15 GHz Kryo & 2x1.6 GHz Kryo) CPU.
Preparations.
- This academic paintings on Linux and Windows 64 simplest.
- Make sure to backup the partitions earlier than writing new contents to your tool, Therefore you could get back to where you began before.
- Don't try to write both boot and recovery in one session.
- Locking or Unlocking the bootloader will delete the whole thing saved to your internal memory, we exceedingly endorse to backup the entirety earlier than proceeding.
- Download tuliptool form Here
- Download Zadig Here
Unlocking Guide (Windows 64 Bit).
- Once the tuliptool effectively downloaded in your computer, now you may extract it.
- You will find a Linux binary and a Win64 binary.
- This is a command line application, so you ought to open a command prompt to run it.
- Now, you must release command activate on the Win64 binary area (press and maintain shift button at the keyboard, then right click on at the empty display and pick open command window right here).
run command prompt - Now, you have to installation Zadig for your pc.
- Enter your ZTE Axon 7 Mini into EDL (emergency Download Mode). How to do it?
- Power off your ZTE Axon 7 Mini.
- Then, unplug the device.
- Hold both extent buttons (Volume Up +Volume down).
- Plug device into your PC through USB cable.
- Then, Wait for about 5 seconds and launch all buttons.
- (un) locking
- tuliptool lock status
- tuliptool lock unencumber
- tuliptool lock lock
- reading boot/recovery
- This will study the selected partition to name-backup.bin
- tuliptool read boot
- tuliptool study recovery
- writing boot/recovery
- This will write name.bin to the chosen partition
- tuliptool write boot
- tuliptool write recovery
- So, as an example, to write down the included TWRP photo, first you must reproduction tulip-twrp-7.1.1.img to healing.bin and then run tuliptool write restoration.
Trouble Shooting (Windows 64 Bit).
- When the tuliptool says device not determined.
- You can fix it through; first input EDL (Emergency Download Mode) mode, then run the tuliptool.
- You can restore it through connecting the device at once to the PC, no longer thru a hub.
- Make positive the WinUSB driver is effectively installed.
0 comments:
Post a Comment